Contact us

XGH ELECTRIC COMPANY ( H.K. )

Add: Jinyuan Industrial Zone, Heao Village, Henggang Town, Longgang District, Shenzhen, Office 1 (fuse Division)
Tel:+86-755-89767089
Fax:+86-755-89767319
E-mail: waimao@xcfuse.com
Zhan Xiaobu: 1st Floor, Shenzhen Huaqiang Electronic World 20A026,20A027 cabinet

  • 商品名称: Thermostat, snap action(Manual reset)
  • 产品介绍:
  • 订购热线:
  • 浏览次数: 1062

立刻詢價

用途Application:
用於空調、飲水機、電熱水瓶、熱水器、淋浴器、消毒櫃、咖啡壺、電蒸鍋等電器的控溫(開關)之用,同是也適用於其他家用電器、電子儀器、電子控制櫃等過熱保護(限溫)。

The products are widly used for the purpose of temperature controlling to air conditioner, water dispenser,electric kettles,water heater,shower, disnfecting cabinet,coffee kettles and rice cooker,etc.It is used for the purpose of over-heat protection to other home electric appliance equipment at the same times.

工作原理及特點Performaces and features:
利用雙金屬片作為感溫元件,當溫度升至動作溫度時,雙金屬片突跳,傳動觸頭迅速動作;當溫度降至某值時,觸點不復位,如需重新接通需採用作用力將復位柄按下,溫控器觸點恢復至原來狀態,達到通斷電路及人為重新起動開關的目的。具有性能穩定、控溫精度高、動作乾脆且體積小,量輕、可靠性高、壽命長、對無線電幹擾小等特點。

Utilized the dished dual bimetal disc as the temperature sensing element.When the temperature raises to the preseted temperature,the disc jumps and enable the contacts to act,The contacts won’t reset automaticlly when the temperature falls,if resonnection is needed,just press the reset button ,and then the contacts of the thermostat come back to the original state,The thermostat are characterised with Stabilized performance,high temperature controlling precision,small bulk,light,high reliablity, and little interference to wireless,etc.

溫馨提示Attention:
1、此手動復位型溫控器在升溫突跳後待溫度下降20℃後方可按復位柄,且用力4~6牛頓為宜,不可過大。
2、為確保溫控器能正常工作,預留復位柄端面到封蓋感溫面垂直距離不小於20.4mm。

Press the reset button after the temperature falls 20℃when the themostat operates ,and the press should be around 4N and 6N.

In order to inssure the thermostat can woek in a normal condition,please keep distance no closer than 20.4mm between the reset button and the surface of the thermostat. 

技術參數Technical parameters:
1、電氣參數:10A/250V(阻性負載);
2、動作溫度範圍:45~150℃(任選),手動復位:斷開溫度精度:±(2.5~5%)℃
3、接線方式:插端子250#(彎0~90%%d可選);插端子187#(彎0~90%%d可選,厚度0.5、0.8mm可選);
4、使用壽命:10A/250V   6000週期;                                                
5、電氣強度:AC1500V歷時1min,無閃絡,無擊穿;
6、接觸電阻:≤50mΩ;
7、絕緣電阻:>100MΩ;
8、形式:常閉型:溫度上升,觸點斷開,手動復位;常開型:溫度上升,觸點接通,手動復位;
9、外殼防護等級:IP00;
10、接地方式:通過溫控器金屬外殼與器件接地金屬零件相連。
11、安裝方式:與KSD301自動復位元系列產品相同。

1.Electrical performance: 10A/250V resistance load

2.Operating temperature range: 45℃-215℃optional,manual reset type:tolerance of the operating temperature range: ±(2.5~5%)℃

3.Terminal type: 250# insert terminal (bowlegged ,0~90°optional). 187# insert terminal bowlegged , 0~90°optional) thickness :0.5mm、0.8mm optional.

4. Durability: 10A/250V  6000 cycles
5.Electrical strength:no breakdown and flas hover under AC 1500V for 1min

6.Contact resistance: ≤50mΩ

7.Isolation resistance: >100MΩ

8.Contact type:Normal closed type:the contacts open when temperature raises manual reset

9. The shell protection Degree: IP00

10.Grounding type:connect the metal shell of the thermostat with the grounded metal parts.

11.Installation type:the same as the auto reset type.

 
外觀尺寸Demension